{"id":11895,"date":"2024-07-15T07:35:51","date_gmt":"2024-07-15T05:35:51","guid":{"rendered":"https:\/\/ksg-pcb.com\/?p=11895"},"modified":"2025-02-18T08:35:02","modified_gmt":"2025-02-18T07:35:02","slug":"pattern-plating-and-panel-plating-the-core-processes-of-printed-circuit-board-production","status":"publish","type":"post","link":"https:\/\/www.ksg-pcb.com\/en\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/","title":{"rendered":"Pattern plating and panel plating: the core processes of PCB production"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"11895\" class=\"elementor elementor-11895\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-25bde68 e-con-full e-flex e-con e-parent\" data-id=\"25bde68\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-b3d5153 e-flex e-con-boxed e-con e-child\" data-id=\"b3d5153\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-65c0f65 elementor-widget elementor-widget-text-editor\" data-id=\"65c0f65\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><strong>In the complex production of printed circuit boards, there are two typical manufacturing processes for the core processes of through-hole plating and structuring. A distinction is made between \"pattern plating\" and \"panel plating\". Depending on the requirements, layer structure and layout, KSG decides on the most suitable manufacturing process. A combination of both processes can also be used.\u00a0<\/strong><strong style=\"font-style: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">(\"semi-pattern plating\") can be used. Design rules for this can be found at <\/strong><span style=\"font-style: inherit; font-weight: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">\u2192\u00a0<\/span><a style=\"font-style: inherit; font-weight: inherit; text-align: var(--text-align); background-color: #ffffff;\" href=\"https:\/\/www.ksg-pcb.com\/en\/know-how\/digital-design-compass\/\" target=\"_blank\" rel=\"noopener\"><span style=\"text-decoration-line: underline;\">8.6 Design Rules | Outer layers\/metallized layer.<\/span><\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-cb5a586 e-flex e-con-boxed e-con e-child\" data-id=\"cb5a586\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c5058e2 elementor-widget elementor-widget-heading\" data-id=\"c5058e2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">General: Integration into the production process<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-9419e9e elementor-widget elementor-widget-image\" data-id=\"9419e9e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img fetchpriority=\"high\" decoding=\"async\" width=\"1481\" height=\"494\" src=\"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2024-07-12-16_18_43-Greenshot.png\" class=\"attachment-full size-full wp-image-12166\" alt=\"\" srcset=\"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2024-07-12-16_18_43-Greenshot.png 1481w, https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2024-07-12-16_18_43-Greenshot-300x100.png 300w, https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2024-07-12-16_18_43-Greenshot-1024x342.png 1024w, https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2024-07-12-16_18_43-Greenshot-768x256.png 768w, https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2024-07-12-16_18_43-Greenshot-18x6.png 18w\" sizes=\"(max-width: 1481px) 100vw, 1481px\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-1d53d85 e-flex e-con-boxed e-con e-parent\" data-id=\"1d53d85\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-e159fde elementor-widget elementor-widget-heading\" data-id=\"e159fde\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">What does pattern plating mean?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-40dcfb9 elementor-widget elementor-widget-text-editor\" data-id=\"40dcfb9\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>The term \"<strong>Pattern plating<\/strong>\" means the coating (<strong>plating<\/strong>) with a pattern (<strong>pattern<\/strong>). It therefore describes the selective electroplating of a production panel that has previously been provided with a photomask. In the photo process, the photomask is applied negatively to the panel in order to selectively build up the conductor pattern in the electroplating process. This is therefore also referred to as <strong>LBA<\/strong> or the <b>Ladder diagram structure<\/b>. The areas covered by the photomask are the areas that will be etched away later. To protect the deposited copper from the subsequent etching process, a thin layer of tin is also applied to the copper. This tin layer serves as an etch resist and has no function for the soldering process. It is removed again after the etching process.<\/p><p>\u00a0<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-4eab00b e-grid e-con-boxed e-con e-parent\" data-id=\"4eab00b\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-c569da7 e-con-full e-flex e-con e-child\" data-id=\"c569da7\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-1176297 elementor-widget elementor-widget-heading\" data-id=\"1176297\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Advantages of pattern plating<br><\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-0383226 elementor-icon-list--layout-traditional elementor-list-item-link-full_width elementor-widget elementor-widget-icon-list\" data-id=\"0383226\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"icon-list.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<ul class=\"elementor-icon-list-items\">\n\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-check\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\"><br>Less copper to be etched and therefore smaller distances possible with comparable conductor thickness than in \"panel plating\"<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-check\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Smaller residual rings tend to be feasible than with \"panel plating\", as the holes do not need to be covered and there is no need for a support surface for the photomask around the hole<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-check\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">   Simple recovery of the etched copper from the alkaline etching process and recycling of the used etching solution<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-check\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">   Fewer restrictions on sizes and shapes of metallized edges<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-check\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Production of partially metallized bores without burrs possible after opening the sleeves by milling<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-c0d24eb e-con-full e-flex e-con e-child\" data-id=\"c0d24eb\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-8f96b7c elementor-widget__width-initial elementor-widget elementor-widget-video\" data-id=\"8f96b7c\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;video_type&quot;:&quot;hosted&quot;,&quot;controls&quot;:&quot;yes&quot;}\" data-widget_type=\"video.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<style>.elementor-element-8f96b7c{display:none !important}<\/style>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-521beb2 elementor-widget__width-initial elementor-widget elementor-widget-video\" data-id=\"521beb2\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;video_type&quot;:&quot;hosted&quot;,&quot;controls&quot;:&quot;yes&quot;}\" data-widget_type=\"video.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"e-hosted-video elementor-wrapper elementor-open-inline\">\n\t\t\t\t\t<video class=\"elementor-video\" src=\"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/KSG_Design-Compass_Process-sequence_Patternplating.mp4\" controls=\"\" preload=\"metadata\"><\/video>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-65b77b3 elementor-widget elementor-widget-text-editor\" data-id=\"65b77b3\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p style=\"text-align: center;\"><strong>XPERTS tip: Save the pattern plating process sequence as a download<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-8f686db e-flex e-con-boxed e-con e-parent\" data-id=\"8f686db\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-abeac01 e-con-full e-flex e-con e-child\" data-id=\"abeac01\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-ce1147d e-con-full e-flex e-con e-child\" data-id=\"ce1147d\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-ad91d9d elementor-widget elementor-widget-heading\" data-id=\"ad91d9d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Challenges<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-605c787 elementor-widget elementor-widget-text-editor\" data-id=\"605c787\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<ul><li>Layout-related fluctuations in the copper heights across the entire production panel are not significant compared to the \"<strong>Panelplating<\/strong>\" higher (avoiding an inhomogeneous copper distribution over the layout can counteract this - \"<b>Copper Balancing\"<\/b>)<\/li><li>Additional process steps required due to the deposition and removal of the technological etch resist layer (electroplated tin)<\/li><li>The copper layer thickness that can be selectively deposited is, in contrast to the \"<strong>Panelplating<\/strong>\" limited by the height of the photo mask<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-81a3ab9 elementor-widget__width-initial elementor--h-position-center elementor--v-position-middle elementor-arrows-position-inside elementor-pagination-position-inside elementor-widget elementor-widget-slides\" data-id=\"81a3ab9\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;navigation&quot;:&quot;both&quot;,&quot;autoplay&quot;:&quot;yes&quot;,&quot;pause_on_hover&quot;:&quot;yes&quot;,&quot;pause_on_interaction&quot;:&quot;yes&quot;,&quot;autoplay_speed&quot;:5000,&quot;infinite&quot;:&quot;yes&quot;,&quot;transition&quot;:&quot;slide&quot;,&quot;transition_speed&quot;:500}\" data-widget_type=\"slides.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"elementor-swiper\">\n\t\t\t\t\t<div class=\"elementor-slides-wrapper elementor-main-swiper swiper\" role=\"region\" aria-roledescription=\"carousel\" aria-label=\"Slides\" dir=\"ltr\" data-animation=\"fadeInUp\">\n\t\t\t\t<div class=\"swiper-wrapper elementor-slides\">\n\t\t\t\t\t\t\t\t\t\t<div class=\"elementor-repeater-item-46adc96 swiper-slide\" role=\"group\" aria-roledescription=\"slide\"><div class=\"swiper-slide-bg elementor-ken-burns elementor-ken-burns--in\" role=\"img\" aria-label=\"KSG Digital Design Compass live Seminar Thumbnail PCB Layout\"><\/div><div class=\"elementor-background-overlay\"><\/div><a class=\"swiper-slide-inner\" href=\"https:\/\/design-compass.ksg-pcb.com\/Login.htm\" target=\"_blank\"><div class=\"swiper-slide-contents\"><div class=\"elementor-slide-heading\">Smart Fact<\/div><div class=\"elementor-slide-description\">Our Digital Design Compass is celebrating its first year - celebrate with us!\nDiscover the newly added content with valuable PCB information.<\/div><div  class=\"elementor-button elementor-slide-button elementor-size-sm\">Discover new content<\/div><\/div><\/a><\/div>\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-b611971 e-flex e-con-boxed e-con e-parent\" data-id=\"b611971\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-8d98efb e-con-full e-flex e-con e-child\" data-id=\"8d98efb\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4d463b7 elementor-widget elementor-widget-heading\" data-id=\"4d463b7\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\"><br>What is panel plating?<br><\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-ee0c5e2 elementor-widget elementor-widget-text-editor\" data-id=\"ee0c5e2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>The term \"<strong>Panelplating<\/strong>\" is derived from the production format, the English term \"<strong>Panel<\/strong>\" (cutting\/printing) and the copper coating, the English word \"<strong>Plating<\/strong>\" from. In this case, the coating is applied without a photomask, i.e. over the entire surface.<\/p><p><span style=\"font-style: inherit; font-weight: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">The term \"<\/span><strong style=\"font-style: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">Tenting technique\"<\/strong><span style=\"font-style: inherit; font-weight: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\"> is used, as in this technology the holes are covered with a photomask (resist film) after electroplating (tent=<\/span><strong style=\"font-style: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">Tent<\/strong><span style=\"font-style: inherit; font-weight: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">). In contrast to the \"<\/span><strong style=\"font-style: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">Pattern plating<\/strong><span style=\"font-style: inherit; font-weight: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">\", the photomask is applied positively and all covered areas also correspond to the structures that remain on the panel after the etching process.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-a6980a3 e-grid e-con-boxed e-con e-parent\" data-id=\"a6980a3\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-004150d e-con-full e-flex e-con e-child\" data-id=\"004150d\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-2838c34 elementor-widget elementor-widget-heading\" data-id=\"2838c34\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Advantages of panelplating<br><\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-f0bf320 elementor-icon-list--layout-traditional elementor-list-item-link-full_width elementor-widget elementor-widget-icon-list\" data-id=\"f0bf320\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"icon-list.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<ul class=\"elementor-icon-list-items\">\n\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-check\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\"><br>Very uniform copper height across the entire production panel, as layout effects are only caused by the distribution of the plated-through holes<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-check\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Precise control of the copper layer possible, e.g. for drill holes with very tight tolerances (e.g. Micro-Press-Fit, a special type of press-fit technology)<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-check\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Reduced contamination of the galvanic copper baths with degradation products from the photomasks<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-check\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Deposition of a tin layer is not necessary, as the function of the etch resist is taken over by the photomask<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item\">\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-check\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">No limitation of the copper layer to be deposited due to the height of the photomask<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-1c7b0cb e-con-full e-flex e-con e-child\" data-id=\"1c7b0cb\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-a2997ea elementor-widget elementor-widget-video\" data-id=\"a2997ea\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;video_type&quot;:&quot;hosted&quot;,&quot;controls&quot;:&quot;yes&quot;}\" data-widget_type=\"video.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<style>.elementor-element-a2997ea{display:none !important}<\/style>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-c25de81 elementor-widget elementor-widget-video\" data-id=\"c25de81\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;video_type&quot;:&quot;hosted&quot;,&quot;controls&quot;:&quot;yes&quot;}\" data-widget_type=\"video.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"e-hosted-video elementor-wrapper elementor-open-inline\">\n\t\t\t\t\t<video class=\"elementor-video\" src=\"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/KSG_Design-Compass_Process-sequence_Panelplating.mp4\" controls=\"\" preload=\"metadata\"><\/video>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-8f4c03d e-flex e-con-boxed e-con e-parent\" data-id=\"8f4c03d\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-997dc1d e-con-full e-flex e-con e-child\" data-id=\"997dc1d\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-ee2b0c7 elementor-widget elementor-widget-heading\" data-id=\"ee2b0c7\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Challenges<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d52d5c2 elementor-widget elementor-widget-text-editor\" data-id=\"d52d5c2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<ul><li>Slightly larger and closed residual rings required than for \"<strong>Pattern plating<\/strong>\"<\/li><li>Not quite as fine a structure as \"<strong>Pattern plating<\/strong>\" possible<\/li><li>Certain layout elements such as large through-holes, milling or edge metallization cannot always be reliably covered with photo masks<\/li><li>Structuring is more demanding in comparison, as the entire copper structure must be etched (the greater the copper thickness to be etched, the greater the spacing must be)<\/li><li>Copper recovery from the acidic etching solutions used here is somewhat more complex compared to the alkaline etching process, as direct electrolysis is not possible<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-9aed6d5 e-flex e-con-boxed e-con e-parent\" data-id=\"9aed6d5\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-e0605e4 e-con-full e-flex e-con e-child\" data-id=\"e0605e4\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-dc50424 elementor-widget elementor-widget-heading\" data-id=\"dc50424\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\"><br>CONCLUSION<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5698013 elementor-widget elementor-widget-text-editor\" data-id=\"5698013\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><span style=\"font-style: inherit; font-weight: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">The <\/span><b style=\"font-style: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">General challenge <\/b><span style=\"font-style: inherit; font-weight: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">is to bring the required copper layer thicknesses in the holes in line with the layout to be structured. Despite the further development of systems and processes, a high copper layer thickness in holes with a very small line\/space always leads to additional work, which is ultimately reflected in the costs. The layout, i.e. the distribution of copper areas and holes within a circuit, also plays a role in copper deposition that should not be underestimated. Through a targeted \"<\/span><b style=\"font-style: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">Copper Balancing\"<\/b><span style=\"font-style: inherit; font-weight: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\"> The quality of the printed circuit boards can be positively influenced as early as the design phase by the use of circuitry optimization techniques, such as filling in open areas (including areas that are milled away later).<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e1fdff6 elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"e1fdff6\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-37ab930 e-flex e-con-boxed e-con e-parent\" data-id=\"37ab930\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-70402ef e-con-full e-flex e-con e-child\" data-id=\"70402ef\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-8d7c328 e-con-full e-flex e-con e-child\" data-id=\"8d7c328\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-776df74 elementor-widget elementor-widget-heading\" data-id=\"776df74\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Any questions?<br><\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-900d22d elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"900d22d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>Do you have further questions about PCB design or need support with the layout and development process?<\/p><p><span style=\"font-style: inherit; font-weight: inherit; text-align: var(--text-align); color: var( --e-global-color-primary );\">Then simply contact the experienced experts at our <strong>Technical support:<\/strong><\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-9ffeeaf elementor-widget elementor-widget-text-editor\" data-id=\"9ffeeaf\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>Phone: <b><span style=\"color: #339966;\">+49 3721 266-555<\/span><br \/><\/b>E-Mail:\u00a0 \u00a0<span style=\"color: #339966;\"><b>ts@ksg-pcb.com<\/b><\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-675d1e4 e-con-full e-flex e-con e-child\" data-id=\"675d1e4\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c495499 elementor-widget elementor-widget-image\" data-id=\"c495499\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<a href=\"https:\/\/www.ksg-pcb.com\/en\/pcb-development-support\/\">\n\t\t\t\t\t\t\t<img decoding=\"async\" width=\"768\" height=\"512\" src=\"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2022_08_10-KSG-Portraits-Gruppen8723-768x512.jpg\" class=\"attachment-medium_large size-medium_large wp-image-11910\" alt=\"Technical support: Help with all aspects of PCB production\" srcset=\"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2022_08_10-KSG-Portraits-Gruppen8723-768x512.jpg 768w, https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2022_08_10-KSG-Portraits-Gruppen8723-300x200.jpg 300w, https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2022_08_10-KSG-Portraits-Gruppen8723-1024x683.jpg 1024w, https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2022_08_10-KSG-Portraits-Gruppen8723-1536x1024.jpg 1536w, https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2022_08_10-KSG-Portraits-Gruppen8723-2048x1365.jpg 2048w, https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/2022_08_10-KSG-Portraits-Gruppen8723-18x12.jpg 18w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/>\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>In der komplexen Fertigung einer Leiterplattenherstellung gibt es f\u00fcr die Kernprozesse Durchkontaktierung und Strukturierung zwei typische Herstellungsverfahren. Es wird dabei in das sogenannte \u201ePatternplating\u201c und \u201ePanelplating\u201c unterschieden. Je nach Anforderungen, [&hellip;]<\/p>\n","protected":false},"author":28,"featured_media":11974,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[221],"tags":[177],"class_list":["post-11895","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-leiterplattenherstellung"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.7 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Patternplating &amp; Panelplating \u26af pcb-blog.com<\/title>\n<meta name=\"description\" content=\"Die Herausforderung bei der Leiterplattenherstellung liegt darin, die Kupferschichtdicken in den Bohrungen mit dem Layout in Einklang zu bringen. Erfahren Sie in diesem Blogartikel mehr zu den Kernprozessen.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.ksg-pcb.com\/en\/pattern-plating-and-panel-plating-the-core-processes-of-printed-circuit-board-production\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Patternplating &amp; Panelplating \u26af pcb-blog.com\" \/>\n<meta property=\"og:description\" content=\"Die Herausforderung bei der Leiterplattenherstellung liegt darin, die Kupferschichtdicken in den Bohrungen mit dem Layout in Einklang zu bringen. Erfahren Sie in diesem Blogartikel mehr zu den Kernprozessen.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.ksg-pcb.com\/en\/pattern-plating-and-panel-plating-the-core-processes-of-printed-circuit-board-production\/\" \/>\n<meta property=\"og:site_name\" content=\"KSG GmbH\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/ksgpcb\/\" \/>\n<meta property=\"article:published_time\" content=\"2024-07-15T05:35:51+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2025-02-18T07:35:02+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/KSG_18.05.22_c_Dirk_Rueckschloss-5999-scaled.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"2560\" \/>\n\t<meta property=\"og:image:height\" content=\"1707\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Daniel Werner\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Daniel Werner\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/\"},\"author\":{\"name\":\"Daniel Werner\",\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/#\\\/schema\\\/person\\\/deff97a687b1c38417eba6ae90cfce4f\"},\"headline\":\"Patternplating und Panelplating: Die Kernprozesse der Leiterplattenherstellung\",\"datePublished\":\"2024-07-15T05:35:51+00:00\",\"dateModified\":\"2025-02-18T07:35:02+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/\"},\"wordCount\":861,\"publisher\":{\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.ksg-pcb.com\\\/wp-content\\\/uploads\\\/2024\\\/07\\\/KSG_18.05.22_c_Dirk_Rueckschloss-5999-scaled.jpg\",\"keywords\":[\"Leiterplattenherstellung\"],\"articleSection\":[\"Blog\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/\",\"url\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/\",\"name\":\"Patternplating & Panelplating \u26af pcb-blog.com\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.ksg-pcb.com\\\/wp-content\\\/uploads\\\/2024\\\/07\\\/KSG_18.05.22_c_Dirk_Rueckschloss-5999-scaled.jpg\",\"datePublished\":\"2024-07-15T05:35:51+00:00\",\"dateModified\":\"2025-02-18T07:35:02+00:00\",\"description\":\"Die Herausforderung bei der Leiterplattenherstellung liegt darin, die Kupferschichtdicken in den Bohrungen mit dem Layout in Einklang zu bringen. Erfahren Sie in diesem Blogartikel mehr zu den Kernprozessen.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.ksg-pcb.com\\\/wp-content\\\/uploads\\\/2024\\\/07\\\/KSG_18.05.22_c_Dirk_Rueckschloss-5999-scaled.jpg\",\"contentUrl\":\"https:\\\/\\\/www.ksg-pcb.com\\\/wp-content\\\/uploads\\\/2024\\\/07\\\/KSG_18.05.22_c_Dirk_Rueckschloss-5999-scaled.jpg\",\"width\":2560,\"height\":1707,\"caption\":\"Patternplating und Panelplating: Die Kernprozesse der Leiterplattenherstellung\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"KSG PCB\",\"item\":\"https:\\\/\\\/www.ksg-pcb.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Patternplating und Panelplating: Die Kernprozesse der Leiterplattenherstellung\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/\",\"name\":\"Leiterplatten & PCB von KSG\",\"description\":\"Leiterplatten aus Europa in Serienqualit\u00e4t\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/#organization\"},\"alternateName\":\"KSG GmbH\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/#organization\",\"name\":\"KSG GmbH\",\"alternateName\":\"KSG PCB\",\"url\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.ksg-pcb.com\\\/wp-content\\\/uploads\\\/2021\\\/03\\\/KSG_Logo_and_Claim_green_rgb.jpg\",\"contentUrl\":\"https:\\\/\\\/www.ksg-pcb.com\\\/wp-content\\\/uploads\\\/2021\\\/03\\\/KSG_Logo_and_Claim_green_rgb.jpg\",\"width\":1925,\"height\":1181,\"caption\":\"KSG GmbH\"},\"image\":{\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/ksgpcb\\\/\",\"https:\\\/\\\/www.instagram.com\\\/ksg_pcb\\\/\",\"https:\\\/\\\/de.linkedin.com\\\/company\\\/ksg-gmbh\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/#\\\/schema\\\/person\\\/deff97a687b1c38417eba6ae90cfce4f\",\"name\":\"Daniel Werner\",\"description\":\"Verfahrenstechnik bei KSG\",\"url\":\"https:\\\/\\\/www.ksg-pcb.com\\\/en\\\/author\\\/daniel-werner\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Patternplating &amp; Panelplating \u26af pcb-blog.com","description":"The challenge in PCB production lies in harmonizing the copper layer thicknesses in the drill holes with the layout. Find out more about the core processes in this blog article.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.ksg-pcb.com\/en\/pattern-plating-and-panel-plating-the-core-processes-of-printed-circuit-board-production\/","og_locale":"en_US","og_type":"article","og_title":"Patternplating & Panelplating \u26af pcb-blog.com","og_description":"Die Herausforderung bei der Leiterplattenherstellung liegt darin, die Kupferschichtdicken in den Bohrungen mit dem Layout in Einklang zu bringen. Erfahren Sie in diesem Blogartikel mehr zu den Kernprozessen.","og_url":"https:\/\/www.ksg-pcb.com\/en\/pattern-plating-and-panel-plating-the-core-processes-of-printed-circuit-board-production\/","og_site_name":"KSG GmbH","article_publisher":"https:\/\/www.facebook.com\/ksgpcb\/","article_published_time":"2024-07-15T05:35:51+00:00","article_modified_time":"2025-02-18T07:35:02+00:00","og_image":[{"width":2560,"height":1707,"url":"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/KSG_18.05.22_c_Dirk_Rueckschloss-5999-scaled.jpg","type":"image\/jpeg"}],"author":"Daniel Werner","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Daniel Werner","Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/#article","isPartOf":{"@id":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/"},"author":{"name":"Daniel Werner","@id":"https:\/\/www.ksg-pcb.com\/en\/#\/schema\/person\/deff97a687b1c38417eba6ae90cfce4f"},"headline":"Patternplating und Panelplating: Die Kernprozesse der Leiterplattenherstellung","datePublished":"2024-07-15T05:35:51+00:00","dateModified":"2025-02-18T07:35:02+00:00","mainEntityOfPage":{"@id":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/"},"wordCount":861,"publisher":{"@id":"https:\/\/www.ksg-pcb.com\/en\/#organization"},"image":{"@id":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/KSG_18.05.22_c_Dirk_Rueckschloss-5999-scaled.jpg","keywords":["Leiterplattenherstellung"],"articleSection":["Blog"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/","url":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/","name":"Patternplating &amp; Panelplating \u26af pcb-blog.com","isPartOf":{"@id":"https:\/\/www.ksg-pcb.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/#primaryimage"},"image":{"@id":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/KSG_18.05.22_c_Dirk_Rueckschloss-5999-scaled.jpg","datePublished":"2024-07-15T05:35:51+00:00","dateModified":"2025-02-18T07:35:02+00:00","description":"The challenge in PCB production lies in harmonizing the copper layer thicknesses in the drill holes with the layout. Find out more about the core processes in this blog article.","breadcrumb":{"@id":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/#primaryimage","url":"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/KSG_18.05.22_c_Dirk_Rueckschloss-5999-scaled.jpg","contentUrl":"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2024\/07\/KSG_18.05.22_c_Dirk_Rueckschloss-5999-scaled.jpg","width":2560,"height":1707,"caption":"Patternplating und Panelplating: Die Kernprozesse der Leiterplattenherstellung"},{"@type":"BreadcrumbList","@id":"https:\/\/www.ksg-pcb.com\/patternplating-und-panelplating-die-kernprozesse-der-leiterplattenherstellung\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"KSG PCB","item":"https:\/\/www.ksg-pcb.com\/"},{"@type":"ListItem","position":2,"name":"Patternplating und Panelplating: Die Kernprozesse der Leiterplattenherstellung"}]},{"@type":"WebSite","@id":"https:\/\/www.ksg-pcb.com\/en\/#website","url":"https:\/\/www.ksg-pcb.com\/en\/","name":"Printed circuit boards &amp; PCBs from KSG","description":"Printed circuit boards from Europe in series quality","publisher":{"@id":"https:\/\/www.ksg-pcb.com\/en\/#organization"},"alternateName":"KSG GmbH","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.ksg-pcb.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.ksg-pcb.com\/en\/#organization","name":"KSG GmbH","alternateName":"KSG PCB","url":"https:\/\/www.ksg-pcb.com\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.ksg-pcb.com\/en\/#\/schema\/logo\/image\/","url":"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2021\/03\/KSG_Logo_and_Claim_green_rgb.jpg","contentUrl":"https:\/\/www.ksg-pcb.com\/wp-content\/uploads\/2021\/03\/KSG_Logo_and_Claim_green_rgb.jpg","width":1925,"height":1181,"caption":"KSG GmbH"},"image":{"@id":"https:\/\/www.ksg-pcb.com\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/ksgpcb\/","https:\/\/www.instagram.com\/ksg_pcb\/","https:\/\/de.linkedin.com\/company\/ksg-gmbh"]},{"@type":"Person","@id":"https:\/\/www.ksg-pcb.com\/en\/#\/schema\/person\/deff97a687b1c38417eba6ae90cfce4f","name":"Daniel Werner","description":"Process engineering at KSG","url":"https:\/\/www.ksg-pcb.com\/en\/author\/daniel-werner\/"}]}},"_links":{"self":[{"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/posts\/11895","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/users\/28"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/comments?post=11895"}],"version-history":[{"count":302,"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/posts\/11895\/revisions"}],"predecessor-version":[{"id":22923,"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/posts\/11895\/revisions\/22923"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/media\/11974"}],"wp:attachment":[{"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/media?parent=11895"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/categories?post=11895"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ksg-pcb.com\/en\/wp-json\/wp\/v2\/tags?post=11895"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}